kevin@coverfleece.com
0512-52138118 / 18662220202
Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
Felt is a wall material that is often used in home decoration. Different felts have different functions, and they all need to be attached to the wall in common.
The main material is wrought iron plate. Choose a snowboard with a moderate thickness. The thickness of the board is thinner and the stiffness is slightly worse, so that air bubbles are easy to form.
The width of the iron plate is 1.25 meters and 1 meter. There is no requirement for the length, and you can choose it according to your needs.
It is recommended to choose a thick special Chinese painting felt. Some can be replaced with a woolen cloth or thick coarse cloth. Colors and textures can be freely chosen, but shrinkage should be considered.
The surface of the wall should not be uneven. If it is not flat, use a wooden stick to make tic-tac-toe to level it, nail it to the surface of the wall, and then lay plywood and iron plates. But this method has many disadvantages.
You can directly use the fine-grained board, which will make the wall smoother and facilitate the construction. Cut the required size, place the iron plate on the wall, and nail it into the steel nail. This effect is that the wall is very flat.
Put the main material on the wrought iron plate. Roll the painting felt from one end to the bottom, and stick it on the iron plate to prevent it from bending.
Brush the glue on the surface of the iron plate, and apply the glue while pasting the painting to prevent the glue from bending and the glue drying.
Put the roll of the painting felt on the glue, and use the scraper from the upper left corner to smooth the painting down and to the right. Finally, cut off the excess painting felt with a steel plate.
The magnetite needs to be strong before construction. The shape is not required, it depends on the situation.
In the process of use, it is easy to touch, squeeze hands and draw. Pay attention to safety when operating. Be careful to keep mobile phones and some electronic products away from magnets to prevent damage.
